DM-RMC-200-C [Crestron Electronics, Inc.]

navigation

Missed DM NVX AV-over-IP Week?

The good stuff from our week-long celebration of innovation is available! Catch webinars, techinars, and other opportunities to learn.

Dive in here

View our entire
product catalog

Dedicated solutions for
the modern workplace.

See the Catalog

Online help

Quickly find the answers and resources you need for all things Crestron. Ask questions, manage previously asked questions, access FAQs, and more.

Learn More

Online help

Quickly find the answers and resources you need for all things Crestron. Ask questions, manage previously asked questions, access FAQs, and more.

Learn More

Products / Video / DigitalMedia Endpoints / Receivers / DM-RMC-200-C

Add to Favorites

DM-RMC-200-C

DigitalMedia 8G+® Receiver & Room Controller 200

A DM 8G+® receiver and display controller with built-in HD scaler and audio amplifier.

Have a question?

Add to a Project

Resources

+ Specifications

+ Downloads & documentation

Find a Dealer

Overview
Specifications
Resources
Models & Accessories

The DM-RMC-200-C provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® receiver, video scaler, audio amplifier, and control interface. It provides a single HDMI® output, along with speaker and line level audio outputs, plus Ethernet, USB HID, and a variety of control ports. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be connected directly to an HDBaseT certified source. Built-in scaling allows the connected display to handle any video resolution up to HD 1080p or WUXGA. Its compact, low-profile design allows the DM-RMC-200-C to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using a single CAT type twisted pair cable.^[1]

DigitalMedia 8G+®
As the leader in HDMI and control system technologies, Crestron developed DigitalMedia (DM®) to deliver the first complete HD AV distribution system to take HDMI to a higher level. DigitalMedia allows virtually any mix of HDMI and other AV sources to be distributed throughout a home, office, school, or virtually any other facility. The latest generation of DM is called DigitalMedia 8G™ (DM 8G®). Engineered for ultra high-bandwidth and ultimate scalability, DM 8G provides a true one-wire lossless transport for moving high-definition video, audio, Ethernet, and control signals over a choice of twisted pair or fiber optic cable.

DM 8G over twisted pair copper wire is called DigitalMedia 8G+ (DM 8G+). DM 8G+ handles uncompressed Full HD 1080p video signals with support for 3D, Deep Color, and HDCP, as well as computer signals up to WUXGA. Audio capabilities include support for high-bitrate 7.1 audio formats like Dolby® TrueHD and DTS-HD Master Audio™ as well as uncompressed linear PCM. All signals are transported over a single CAT type cable, supporting distances up to 330 feet (100 m) using Crestron DM 8G Cable or CAT5e.^[1]
HDBaseT® Certified
Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with other HDBaseT certified products. Via its DM 8G+ input, the DM-RMC-200-C can be connected directly to an HDBaseT compliant source without requiring a DM transmitter.

Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-200-C for connection to a display or other device. The HDMI output can also handle DVI signals using an appropriate adapter or interface cable^[2].A single CAT type cable connects the DM-RMC-200-C to a DM switcher or transmitter, or to an HDBaseT source, transporting video, audio, control, and networking signals all through one simple RJ45 connection.^[1] Multiple DM-RMC-200-Cs may be installed to handle each display in a multiroom distribution system, all fed from a central DM-MD series switcher. Or, a single DM-RMC-200-C can be fed straight from a DM 8G+ or HDBaseT transmitter, affording a simple solution for extending a computer or AV signal to a single display.

High-Definition Scaler
Through a distributed scaler approach, DigitalMedia truly delivers the most flexible and user-friendly solution for routing multiple disparate sources to many different display devices. By placing an independent high-performance scaler at every display device, DM ensures an optimal image on every screen no matter what sources are selected. Distributed scaling allows a high-res computer source to be viewed on any display in the building. It also allows a high-definition 3D source to be viewed on lower-resolution 2D displays without compromising the original signal, letting you share your theater’s full HD 1080p 3D image with smaller, lesser displays in other rooms.The DM-RMC-200-C accepts any video source from standard NTSC 480i to Full HD 1080p60, as well as computer sources from VGA to UXGA/WUXGA, and scales them perfectly to match the native resolution of your video display. A range of common output resolutions are supported to work with virtually any popular flat-panel display, projector, or computer monitor. Intelligent frame rate conversion enables support for 24p and PAL format sources, and 3D to 2D conversion allows 3D content to be fed simultaneously to separate 3D and 2D displays.^[3] Setup and use of the scaler is simplified through fully automatic operation utilizing the display’s EDID^[4].

Dual-Projector 3D Support
A pair of DM-RMC-200-Cs can be used to facilitate a dual-projector 3D setup, steering just the left eye portion of a 3D signal to one projector, and the right eye portion to the other. This is done using the scaler’s 3D to 2D conversion mode, enabling 3D capability with scaling.^[3]

Video Wall Processing
The DM-RMC-200-C has another trick up its sleeve, providing zoom capability and bezel compensation on its output to display just a portion of the source image. Using this feature, multiple units may be combined to configure a video wall composed of up to 16 individual displays. Configurations of 2x2, 3x2, 3x3, 4x3, or 4x4 are supported, and all that is required is a separate DM-RMC-200-C for each display, and a DM switcher with sufficient DM 8G+ outputs.

Audio Extracting
The DM-RMC-200-C is equipped with an analog audio output, allowing stereo audio signals to be extracted from the digital stream and fed to a pair of speakers or a local sound system. The output volume is adjustable via a control system using a keypad, touch screen, handheld remote, or mobile device.^[5]

Built-in Audio Amplifier
Its built-in 30 Watt stereo amplifier allows the DM-RMC-200-C to drive a pair of speakers without requiring a separate amplifier.^[5]

LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates high-speed Ethernet networking for a total signal distribution solution. The DM-RMC-200-C includes a 10/100 Ethernet port, providing a convenient LAN connection for a local network device.

USB Signal Extension
DigitalMedia allows for the routing of USB signals alongside video and audio. A USB HID compliant mouse or keyboard can be connected directly to the DM-RMC-200-C and used to control a computer or media server that’s located at the central equipment cabinet or some other location. Crestron also offers USB over Ethernet Extender Modules (USB-EXT-DM)^[6], which may be added to enable support for more USB devices of virtually any type.

Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control desired for a seamless user experience. The DM-RMC-200-C includes built-in RS-232, IR, and Ethernet control ports to allow programmable control of the display device connected to it. But, it can also provide an alternative to such conventional control methods by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to the control system, the DM-RMC-200-C provides a gateway for controlling the display device right through the HDMI connection, potentially eliminating the need for any dedicated control wires or IR emitters.Two low-voltage relay ports are also included on the DM-RMC-200-C for control of a projection screen or lift. Also, there are two discrete digital input ports to accommodate room occupancy sensors, power sensors, or contact closures for enhanced automation and monitoring.

Low-Profile Installation
Its low-profile design makes the DM-RMC-200-C perfect for installation behind a flat panel display or above a ceiling mounted projector. It mounts to a standard 2-gang US, UK, or European electrical box using the mounting bracket provided. The bracket even includes a convenient holder for the external power pack, providing for a clean installation that protrudes a mere 1-5/8 inches (41 mm) from the mounting surface.Connections for the display device are all positioned along the top and bottom of the unit for a clean, serviceable installation. The DigitalMedia and relay connections are provided on the rear panel within the electrical box. Speakers may be connected to either the top panel or the rear. One of the digital input control ports is located on the rear panel, with the other provided on the bottom. An array of indicators is provided on the front of the DM-RMC-200-C for easy setup and troubleshooting.

Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.

Key Features

DigitalMedia 8G+® receiver, high-definition scaler, audio amplifier, and display controller
Connects to a DM® switcher or transmitter over a single CAT type twisted pair cable^[1]
Supports cable lengths up to 330 ft (100 m) using DM 8G® cable or CAT5e^[1]
HDBaseT® Certified — Enables direct connection to other HDBaseT certified equipment
Provides one HDMI® or DVI display output^[2]
Handles any video resolution from standard NTSC 480i or PAL 576i, to HD 1080p60 w/Deep Color
Handles any computer resolution from VGA to UXGA/WUXGA
Scales the signal to match the native resolution of virtually any digital video display or computer monitor up to 1080p or WUXGA
Provides intelligent frame rate conversion
Includes content-adaptive noise reduction
Allows motion-adaptive de-interlacing or interlacing
Allows adjustable overscan or underscan up to 7.5%
Provides automatic 3D to 2D signal conversion^[3]
Automatically passes 3D video without scaling to 3D capable displays^[3]
Supports left/right eye steering for dual-projector 3D setups^[3]
Scalable zoom feature enables 2x2, 3x2, 3x3, 4x3, or 4x4 video wall capability^[7]
Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
Provides a stereo analog line-level audio output with volume control^[5]
Allows extraction of stereo 2-channel audio signals^[5]
Includes a built-in 30 Watt stereo amplifier^[5]
HDCP compliant
Provides a 10/100 Ethernet LAN connection
Enables device control via CEC, IR, RS-232, and Ethernet
Provides two relay control ports and two contact sensing inputs
Enables USB HID signal extension for a local keyboard/mouse
Compatible with Crestron® USB over Ethernet Extenders^[6]
Allows quick, easy setup and diagnostics
Low-profile design mounts to a 2-gang US, UK, or European wall box
Includes mounting bracket with integral power pack holder
Universal power pack included

For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable or third-party CAT5e (or better) UTP or STP. (Crestron legacy DM-CBL DigitalMedia Cable or DM-CBL-D DigitalMedia D Cable may also be used.) The maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D. 3D with scaling is only supported using two DM-RMC-200-Cs configured for use with a dual-projector 3D setup.
EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal that enables a display device to tell the source device what resolutions and formats it can support, allowing the source to configure itself automatically to feed the best signal that both devices can support.
The analog stereo audio output (line-level and amplified) is only active when the DM-RMC-200-C is receiving a 2-channel stereo signal.
USB-EXT-DM USB over Ethernet Extender Modules are sold separately. Refer to the USB-EXT-DM spec sheet for more information.
Video wall processing requires a separate DM-RMC-200-C for each individual display.
With or without reduced blanking.
With reduced blanking only.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

Video
	Scaler	HD video scaler, motion-adaptive deinterlacer, interlacer, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion^[3], content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing (2x2, 3x2, 3x3, 4x3, or 4x4)^[7]
	Input Signal Types	DM 8G+® (DigitalMedia™ over one CAT type twisted pair copper wire), HDBaseT® ^[1]
	Output Signal Types	HDMI®, DVI^[2]
	Formats	DM 8G+, HDBaseT, & HDMI w/Deep Color & 3D^[3]; DVI; HDCP content protection support
	Input Resolutions, Progressive	640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
	Input Resolutions, Interlaced	720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
	Scaler Output Resolutions, Progressive	640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz^[8], 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz^[8], 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz^[8], 1400x1050@60Hz^[8], 1440x900@60Hz^[8], 1600x900@60Hz^[9], 1600x1200@60Hz, 1680x1050@60Hz^[8], 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz^[9], 2048x1152@60Hz^[9]
	Scaler Output Resolutions, Interlaced	720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30)
	Pass-Thru Output Resolutions	Matched to input
Audio
	Input Signal Types	DM 8G+, HDBaseT
	Output Signal Types	HDMI, analog stereo (speaker and line level)^[5]
	Formats, HDMI	Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM
	Formats, Analog	Stereo 2-Channel^[5]
	Digital-To-Analog Conversion	24-bit 48 kHz
	Performance (analog)	Amplifier Output Power: 15 Watts per channel at 8 Ohms; Frequency Response: 20Hz to 20kHz ±0.5dB (line), 20Hz to 16kHz ±3dB (speaker); S/N Ratio: >95dB (line), >75dB (speaker) 20Hz to 20kHz A-weighted; THD+N: <0.005% (line), <0.3% (speaker) @ 1kHz; Stereo Separation: >90dB (line), >60dB (speaker)
	Volume Gain Range (analog)	-80dB to 0dB
Communications
	Ethernet	10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
	USB	Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders^[6]
	RS-232	2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
	IR/Serial	1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud
	DigitalMedia	DM 8G+, HDCP, EDID, CEC, Ethernet
	HDBaseT	HDCP, EDID, Ethernet
	HDMI	HDCP, EDID, CEC
	NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI device and a control system
Connectors – Bottom
	DIG IN	(1) 2-pin 3.5mm detachable terminal block; Digital/contact closure sensing input; Rated for 0-24 Volts DC, referenced to GND; Input Impedance: 2.2k Ohms pulled up to 5 Volts DC; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
	HDMI OUT	(1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI^[2]
	USB HID	(1) USB Type A female; USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device
	COM	(1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support
	IR 1 – 2	(1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial ports; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
Connectors – Top
	AUDIO OUT R, L (Speaker)	(2) 2-pin 5mm detachable terminal blocks; Left & Right speaker-level audio outputs^[5]; Paralleled with rear panel AUDIO OUT connectors; Wire Size: Connector accepts 12 AWG maximum; Output Power: 15 Watts per channel at 8 Ohms
	AUDIO OUT R, L (Line)	(2) RCA female; Stereo unbalanced line-level audio output^[5]; Output Level: 2 Vrms maximum; Output Impedance: 100 Ohms nominal
	LAN	(1) 8-wire RJ45 female, shielded10Base-T/100Base-TX Ethernet port
	24VDC 2.0A MAX	(1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2420RU power pack included
Connectors – Rear
	G	(1) 6-32 screw, chassis ground lug
	AUDIO OUT L, R (Speaker)	(2) 2-pin 5mm detachable terminal blocks; Left & Right speaker-level audio outputs^[5]; Paralleled with top panel AUDIO OUT (Speaker) connectors; Wire Size: Connector accepts 12 AWG maximum; Output Power: 15 Watts per channel at 8 Ohms
	RELAY 1 – 2	(1) 4-pin 3.5mm detachable terminal block comprising (2) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts
	DIG IN	(1) 2-pin 3.5mm detachable terminal block; Digital/contact closure sensing input; Rated for 0-24 Volts DC, referenced to GND; Input Impedance: 2.2k Ohms pulled up to 5 Volts DC; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
	DM IN	(1) 8-pin RJ45 female, shielded; DM 8G+ input, HDBaseT compliant; Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable^[1]
Controls & Indicators
	PWR	(1) green LED, indicates operating power supplied via local power pack
	DM LINK	(1) green LED, indicates DM link status
	VIDEO	(1) green LED, indicates video signal presence and lock status
	USB HID	(1) green LED, indicates a valid device connection and activity on the USB HID port
	SETUP	(1) red LED and (1) miniature recessed pushbutton, for Ethernet setup
	RESET	(1) miniature recessed pushbutton, for hardware reset
	LAN (Top)	(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
	DM IN (Rear)	(2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
Power Requirements
	Power Pack	2 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included
Environmental
	Temperature	32° to 104°F (0° to 40°C)
	Humidity	10% to 90% RH (non-condensing)
	Heat Dissipation	Power amp off: 50 BTU/Hr; Power amp on: 60 BTU/Hr (typical), 165 BTU/Hr (maximum)
Enclosure
	Chassis	Metal, black finish, vented sides and front
	Mounting	Mounts to a 2-gang electrical box, 2-Gang UK (BS 4662) electrical box, or 2-Gang European (DIN 49073) electrical box; bracket includes holder for the included power pack
Dimensions
	Height	7.92 in (202 mm)
	Width	10.84 in (276 mm) with mounting bracket
	Depth	1.85 in (47 mm) with mounting bracket
Weight
	3.25 lb (1.48 kg) including bracket and power pack

Click here to search product certificates.

For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable or third-party CAT5e (or better) UTP or STP. (Crestron legacy DM-CBL DigitalMedia Cable or DM-CBL-D DigitalMedia D Cable may also be used.) The maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D. 3D with scaling is only supported using two DM-RMC-200-Cs configured for use with a dual-projector 3D setup.
EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal that enables a display device to tell the source device what resolutions and formats it can support, allowing the source to configure itself automatically to feed the best signal that both devices can support.
The analog stereo audio output (line-level and amplified) is only active when the DM-RMC-200-C is receiving a 2-channel stereo signal.
USB-EXT-DM USB over Ethernet Extender Modules are sold separately. Refer to the USB-EXT-DM spec sheet for more information.
Video wall processing requires a separate DM-RMC-200-C for each individual display.
With or without reduced blanking.
With reduced blanking only.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Pricing Region Select

Please select your region below to see the appropriate Advertised Pricing.

GREAT TEAMS OWN THE MOMENT

Explore moments made possible with DM NVX® technology.

Explore moments made possible with DM NVX® technology.

Explore moments made possible with DM NVX® technology.

GREAT TEAMS OWN THE MOMENT

Explore moments made possible with DM NVX® technology.

GREAT TEAMS OWN THE MOMENT

GREAT TEAMS OWN THE MOMENT

Missed DM NVX AV-over-IP Week?

View our entire
product catalog

Online help

Online help

Key Features

GREAT TEAMS OWN THE MOMENT

Explore moments made possible with DM NVX® technology.

Explore moments made possible with DM NVX® technology.

Explore moments made possible with DM NVX® technology.

GREAT TEAMS OWN THE MOMENT

Explore moments made possible with DM NVX® technology.

GREAT TEAMS OWN THE MOMENT

GREAT TEAMS OWN THE MOMENT

Missed DM NVX AV-over-IP Week?

View our entire product catalog

Online help

Online help

Key Features

View our entire
product catalog