Shade and Drape Controller, 2 outputs for 120 VAC 3-wire bidirectional motors
The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens.
The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens. The C2N-SDC is a Cresnet® device with two independently controlled 120V AC outputs. Each output provides up/down or open/close control of a conventional three-wire bidirectional type motor. Built-in timing and interlock logic make it easy to program the C2N-SDC for failsafe operation.
The C2N-SDC mounts in the wall or ceiling using an off-the-shelf 4" square or 2-gang electrical box. Pushbuttons on the front of the unit allow for manual operation of the motors during installation and setup.
| Load Ratings |
| | Motor Control Channels | 2 |
| | Per Channel | 7.5 Amps, 1/3 HP |
| | Total | 15 Amps |
| | Load Types | 3-Wire 120V AC bidirectional motors |
| Power Requirements |
| | Line Power | 120 Volts AC, 50-60Hz, single-phase |
| | Cresnet Power Usage | 3 Watts (0.125 Amps @ 24 Volts DC) |
| Connections (rear) |
| | Hot | (1) Class 1 flying lead, 14 AWG, black, line power input |
| | Neutral | (1) Class 1 flying lead, 14 AWG, white, neutral |
| | Ground | (1) Class 1 flying lead, 14 AWG, green, ground |
| | Load 1 - 2 | (2) 4-pin terminal blocks comprising (2) independent 120V AC 3-wire bidirectional motor control outputs;
Includes terminals for up/open drive (U), down/close drive (D), common/neutral (C), and ground;
Maximum Wire Size: 14 AWG |
| Connectors (front) |
| | NET | (2) 4-pin 3.5mm detachable terminal blocks;
Cresnet slave ports, paralleled;
Connect to Cresnet control network |
| Buttons |
| | 1 UP/DOWN | (2) buttons for local control of output #1 |
| | 2 UP/DOWN | (2) buttons for local control of output #2 |
| | SETUP | (1) button used for touch-settable ID (TSID) |
| LED Indicators |
| | PWR | (green) Indicates DC power supplied from Cresnet network |
| | NET | (yellow) Indicates communication with the Cresnet system |
| | SETUP | (red) used for touch-settable ID (TSID) |
| Environmental |
| | Temperature | 41° to 122°F (5° to 50°C) |
| | Humidity | 10% to 90% RH (non-condensing) |
| Enclosure |
| | Flat metal plate mountable in a 4-inch square or 2-gang electrical box, 1.5 inch minimum depth; mount 2-gang box horizontally to maintain correct orientation |
| Dimensions |
| | Height | 4.10 in (104.1 mm) |
| | Width | 4.10 in (104.1 mm) |
| | Depth | 1.15 in (29.2 mm) |
| Weight |
| | 0.55 lb (0.25 kg) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.