4 Channel 0-10V Dimmer, 4 Feeds, DIN Rail Mount
- 4 channels of 0-10 Volt dimming control
- Supports 120 and 220 to 240 Volt, 50/60 Hz applications
- Allows switching of lighting and exhaust fans[1]
Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.
The DIN-4DIMFLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-4DIMFLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps[1] and 1/2 HP motors.
Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.
DIN Rail Installation
The DIN-4DIMFLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-4DIMFLV4's front panel stays accessible while the connections are concealed.
Cresnet®
The DIN-4DIMFLV4 communicates with Crestron® control systems such as the DIN-AP2 or DIN-AP3 Automation Processors via the Cresnet control network. Use one of the unit’s two Cresnet ports to daisy-chain several DIN Rail Series automation control modules.
Key Features
- Provides 4 channels of 0-10 Volt dimming control
- Supports 120 and 220 to 240 Volt, 50/60 Hz applications
- Allows switching of lighting and exhaust fans[1]
- Includes an override input
- Communicates using Cresnet®
- Sets up via the front panel or through software
- Offers programmable functionality via DIN-AP2 or DIN-AP3
- Mounts on a 9M wide DIN rail
- CEC Title 24 2013 Compliant
| Load Ratings |
| |
Dimmer Channels |
4 |
| |
Maximum Per Channel |
5 Amps @ 120 to 240 Volts AC, 50/60 Hz;
600 Watts @ 120 Volts AC;
1150 Watts @ 230 Volts AC;
1200 Watts @ 240 Volts AC, 0.5 HP;
16 Amps Resistive |
| |
Module Total |
20 Amps @ 120 to 240 Volts AC, 50/60 Hz;
2400 Watts @ 120 Volts AC;
4600 Watts @ 230 Volts AC;
4800 Watts @ 240 Volts AC |
| |
Dim Load Types |
0-10 Volt fluorescent ballast or LED driver (4-wire);
Maximum of 30 dimmable ballasts/drivers |
| |
Switch Load Types[1] |
Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motors |
| Connections |
| |
OUTPUT 1 – 4 |
(2) 4-pin 3.5mm detachable terminal blocks comprising (4) isolated dimming control outputs;
Voltage Control Range: 0 to 10 Volts DC;
Maximum Sink Current: 60mA per channel;
Output Resolution: 1024 levels (10 bit) |
| |
1 – 4 |
(4) sets of (2) captive screw terminals;
Isolated Class 1 SPST relay switch circuits 1 – 4;
Relay Rating: 5 Amps maximum per channel;
Maximum Wire Size: 12 AWG (2.5 mm²) |
| |
NET |
(2) 4-pin 3.5mm detachable terminal blocks, paralleled;
Cresnet® slave port |
| |
OVERRIDE |
(2) 2-pin 3.5mm detachable terminal blocks, paralleled;
Sensing input for external low-voltage contact closure;
Activates override mode when a closure is present;
Minimum Closure Rating: 10mA (per module) at 24 Volts |
| Controls & Indicators |
| |
1 – 4 |
(4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel |
| |
NET ID |
(2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; digits also display output levels |
| |
SETUP |
(1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID |
| |
OVR |
(1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets |
| |
PWR |
(1) Green LED, illuminates when DC power is applied to the NET port |
| |
NET |
(1) Yellow LED, indicates communication with the control processor |
| |
RESET |
(1) Recessed miniature pushbutton, resets internal processor |
| Enclosure |
| |
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm) |
| Power Requirements |
| |
Cresnet Power Usage |
4.2 Watts (0.18 Amps) @ 24 Volts DC |
| Environmental |
| |
Temperature |
32° to 104° F (0° to 40° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
17 BTU/hr |
| Dimensions |
| |
Height |
3.71 in (95 mm) |
| |
Width |
6.26 in (159 mm) |
| |
Depth |
2.35 in (60 mm) |
| Weight |
| |
9.2 oz (260 g) |
| Standards & Certifications |
| |
UL Listed |
| |
CE |
| |
CEC Title 24 2013 Compliant |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.