FlipTop™ Cable Retractor, HDMI® to HDMI Cable
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
Cable retractor for Crestron® FlipTop™ cable management systems.
Photo shows model CBLR2-HD in horizontal orientation.
Crestron® Cable Retractors offer a refined solution for Crestron FlipTop™ cable management systems. Each cable pulls out smoothly to a length of 3 f t (0.9 m ) and latches in position. A second pull of the cable releases the latch and retracts the cable back into the compartment.
Each Crestron Cable Retractor features a patented mechanism that dampens the rate of retraction to prevent the cable from whipping as it pulls back into the FlipTop storage compartment. The retraction speed is installer adjustable to ensure full and effortless retraction without excessive force.
Up to three, four, or six cable retractors may be installed depending on the FlipTop model . Spacer inserts are available to fill any unused cable retractor slots.1
Cable retractors may be mounted vertically or horizontally . In the vertical position, the retractors hang straight down from the bottom of the FlipTop box allowing them to be hidden in a pedestal leg or similar space directly beneath the FlipTop. When positioned horizontally, the retractors project to the sides or front of the FlipTop, eliminating any obstruction near the floor.
A 7 f t (2.1 m ) long tail is provided at the back-end of each cable retractor beneath the tabletop. This tail may be plugged into a wall plate or floor box, or connected to a DigitalMedia™ transmitter or similar interface device mounted under the table.
Several models of cable retractors are offered to support HDMI®3, DisplayPort™2, VGA, stereo audio, USB, and CAT5e connectivity. The CAT5e model is suitable for Ethernet, HDBaseT®, and DigitalMedia 8G+® applications.
CBLR2 series cable retractors may be installed in place of, or in combination with, existing 1st generation CBLR series cable retractors.3
To configure a complete 600 Series FlipTop with your choice of finishes, cables, cable retractors, connector plates, and power outlets, use the online Crestron FlipTops Configuration Tool.
Key Features
- Connectivity for FlipTops™ cable management systems
- Keeps interface cables at-the-ready
- Eliminates hanging cable loops beneath the table
- Cable pulls out smoothly to a length of 3 ft ( 0.9 m), and retracts by simply lifting it vertically above the table
- Provides a 7 ft (2.1m) long tail below the table
- Patented mechanism prevents cables from whipping while retracting
- Models support HDMI® 2 , DisplayPort™ , VGA, stereo audio, USB, Ethernet, HDBaseT®, and DigitalMedia 8G+® connectivity
- Vertical and horizontal mounting options accommodate most tabletop applications
FlipTop™ Compatibility |
Supported Bracket |
Supported Bracket |
CBLRA-BRKT-3-FT |
C2N-FTB-D, FT-PWR-D, QM-FTCC,
QM-FTCC-NB, QM-FTDC,
QM-FTDC-NB, QM-FTMC,
QM-FTMC-NB, QM-FTMCSC,
QM-FTMCSC-NB
Fits up to 3 cable retractors. |
CBLRA-BRKT-4-FT |
C2N-FT-TPS4, C2N-FT-TPS4-U,
FT-PWR-D-LG, QM-FTCC-TPS4
Fits up to 4 cable retractors. |
CBLRAI-BRKT-4-FT |
FTI-PWR-D, QMI-FTCC, QMI-FTDC,
QMI-FTMC, QMI-FTMCSC
Fits up to 4 cable retractors. |
Bracket not required. |
FT-600, FT-TS600, FT-TSC600
Fits up to 3 cable retractors on one side only. |
Bracket not required. |
FT-600, FT-TS600, FT-TSC600
Fits up to 6 cable retractors. |
Bracket not available. |
IM-FTCC-M, IM-FTCCV-M,
IMI-FTCC-M, IMI-FTCCV-M,
QMI-FTCC-TPS4
Retractors not supported. |
Available Cable Types |
CBLR2-HD |
Pull-Out End: HDMI Type A male 3 ft (0.9 m)
Back End: HDMI Type A male 7 ft (2.1 m) |
CBLR2-MDP-DP |
Pull-Out End: Mini-DisplayPort male 3 ft (0.9 m)
Back End: DisplayPort male 7 ft (2.1 m) |
CBLR2-VGA |
Pull-Out End: HD15 male 3 ft (0.9 m)
Back End: HD15 male 7 ft (2.1 m) |
CBLR2-VGA-AUDIO (Unbalanced) |
Pull-Out End: HD15 male & 3.5 mm mini-TRS male 3 ft (0.9 m)
Back End: HD15 male & 3.5 mm mini- TRS male 7 ft (2.1 m) |
CBLR2-AUDIO (Unbalanced) |
Pull-Out End: 3.5 mm mini-TRS male 3 ft (0.9 m)
Back End: 3.5 mm mini-TRS male 7 ft (2.1 m) |
CBLR2-USB |
Pull-Out End: USB Type-A male 3 ft (0.9 m)
Back End: USB Type-A male 7 ft (2.1 m) |
CBLR2-CAT5E
(T-568B straightthrough, unshielded) |
Pull-Out End: RJ45 male 3 ft (0.9 m)
Back End: RJ45 male 7 ft (2.1 m) |
Environmental |
Temperature |
41° to 104°F (5° to 40°C) |
Humidity |
10% to 90% RH (non-condensing) |
Enclosure |
Metal, black |
Dimensions |
Height |
22.44 in. (570 mm) |
Width |
1.12 in. (29 mm) |
Depth |
4.00 in. (102 mm) |
See Additional Dimensions below for mounting variations |
Weight |
2.14 lb (970 g) each |
Compliance |
CE |
Additional Dimensions |
Dimensions include CBLR2 retractor, specified bracket, FlipTop Box with the lid closed, and required mounting brackets. |
Mounted vertically using CBLRA-BRKT-3-FT |
Height |
25.00 in. (635 mm) |
Width |
6.75 in. (172 mm) |
Depth |
7.74 in. (197 mm) |
Mounted horizontally using CBLRA-BRKT-3-FT |
Height |
9.27 in. (236 mm) |
Width |
6.75 in. (172 mm) |
Depth |
23.04 in. (586 mm) |
Mounted vertically using CBLRA-BRKT-4-FT |
Height |
25.32 in. (644 mm) |
Width |
7.67 in. (195 mm) |
Depth |
8.40 in. (214 mm) |
Mounted horizontally using CBLRA-BRKT-4-FT |
Height |
9.60 in. (244 mm) |
Width |
8.50 in. (216 mm) |
Depth |
23.61 in. (600 mm) |
Mounted vertically using CBLRAI-BRKT-4-FT |
Height |
25.14 in (639 mm) |
Width |
7.67 in. (195 mm) |
Depth |
8.34 in. (212 mm) |
Mounted horizontally using CBLRAI-BRKT-4-FT |
Height |
9.42 in. (240 mm) |
Width |
7.67 in. (195 mm) |
Depth |
23.68 in. (602 mm) |
Mounted vertically to both sides of a FlipTop 600 Series |
Height |
25.29 in. (643 mm) |
Width |
10.16 in. (258 mm) |
Depth |
6.77 in. (172 mm) |
Mounted horizontally to both sides of a FlipTop 600 Series |
Height |
9.48 in. (241 mm) |
Width |
42.03 in. (1068 mm) |
Depth |
6.77 in. (172 mm) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.